You need a Base Station which connects to the internet with an ethernet cable and place the antenna in a place preferably high up and free of obstacles so that it can receive the data from the wireless sensors. Then download the application for computer or mobile "G7 Client", enter the data of your Base Station and you can see and monitor the parameters of the sensors.

Every Base Station can connect 64 wireless sensors and the "Extender" Base Station can connect 96 sensors

Without obstruction they reach 1200m

In the setup where you need more distance, either due to lack of internet connection or something else, the "Extender Base Station" is recommended. In this case, two bases are required, instead of just one, since one "Extender Base Station "receives the data from the sensors and transmits it to the second "Extender Base Station" which is connected to the internet. With this configuration it can reach a distance of 5km.

An annual fee of $ 50 is charged for service, alerts, and cloud storage

Yes, you can configure parameters of the sensors and if they exceed the limit it alerts you by Email, Push Notification through a secondary app called "Agrimonitoreo" or in the application "G7 Client" itself when it is open

When you select a "Base Station" the option of the "Upload Interval" appears. This means how often you want the base to receive data from the sensors. The more often, the more battery they use. The battery of the sensors can last 3-5 years with the “Upload Interval” set to 30 minutes.